Lineair™ for IL
Coming Soon…
The LIN-E-AIR™ for IL is designed for installations where moisture, dirt, corrosion and vibration may be present.
STOP REPLACING BULBS AND BALLASTS
Save energy and labor by upgrading to LED using RETRUS™ to retrofit your existing fixtures. Try RETRUS™ for 30 days 100% risk free.
Prev
Next
RETRUS™ FOR HL
Benefits:
- Instant-on/no warm up
- Extreme compact size and weight
- Energy-efficient/up to 65% savings when compared to traditional HID lighting
- Up to 23 years (at 12hrs a day) of light, eliminating bulb and ballast replacement maintenance
- Operating ambient -40°C to +55°C* (see datasheet)
- 5 year warranty
- High CRI for improved visibility and clarity
- Damn near bulletproof
Retrofitable models:
CROUSE-HINDS CHAMP RETROFIT
APPLETON MERCMASTER II RETROFIT
APPLETON MERCMASTER III RETROFIT
KILLARK CERTI-LITE RETROFIT
HOLOPHANE PETROLUX II RETROFIT
ge filtr-guard h2 retrofit
Specification
| MODEL WATTAGE | 20W | 36W | 60W | |
| LUMEN OUTPUT | 2600 LM (GM) 2300 LM (XPC) | 5200 LM (GM) 4900 LM (XPC) | 8700 LM (GM) 8100 LM (XPC) | |
| DIMENSIONS | Various (see drawings) | |||
| NET FIXTURE WEIGHT | Various (see drawings) | |||
| ENCLOSURE MATERIAL | Copper free aluminum alloy | |||
| FINISH | Polyester powder coat finish | |||
| HARDWARE AND MOUNTING | Marine grade stainless steel parts and screws | |||
| CABLE GLANDS AND CONNECTORS | Classified for CID2 nickel plated brass cable gland | |||
| LENS | Military Grade UL94 V-0 rated Lexan/Tempered clear borosilicate glass | |||
| LIGHT SOURCE | Samsung LEDs | R1 | |||
| COLOR RENDITION INDEX (CRI) | > 70 | |||
| INPUT POWER (+25°C) | 20W | 36W | 60W | |
| FIXTURE EFFICIENCY | 135 LPW (GM) 125 LPW (XPC) | 140 LPW (GM) 135 LPW (XPC) | 145 LPW (GM) 140 LPW (XPC) | |
| LED DRIVER | Inventronics 90-305VAC | Custom made 120-277 VAC | MeanWell 90-295 VAC | |
| LED DRIVER PROTECTION | Short circuit, over load protection, over voltage | Output short circuit, over temperature | ||
| SURGE PROTECTION | 2 kV | 1 kV | 2kV | |
| POWER FACTOR | > 0.95 (120, 220VAC) > 0.9 (277VAC) | > 0.95 | > 0.95 at 115V | |
| THD (total harmonic distortion) | <20% | <30% | <20% | |
| INRUSH CURRENT | 40А | 27A | 45A | |
| AMBIENT OPERATING TEMPERATURE | -40°C to +55°C | -40°C to +55°C | -40°C to +50°C | |
| T-RATING for (+55°C) | Т6 | T5 | T6 | |
| FIXTURE LIFE (+25°C) | 120 000 hours | 70 000 hours | 100 000 hours | |
| FIXTURE LIFE (+55°C) | 40 000 hours | 40 000 hours | 50 000 hours (+50°C) | |
| FIXTURE LIFE (+65°C) | N/A | N/A | N/A | |
| WARRANTY | 5 year | 5 Years | 5 Years | |
Step 1 create your own
Ordering Information:
Part number example: PRO-HL-SB-PPC-RV-120-5K-60W-S
Family name
RET
Enclosure type
HL
Mounting
RFC
RFK
RFH
RFA2
RFA3
RFGE
RFTB
RFCN
Reflector (lens)
GM
XPC
Voltage
RV
HV
Secondary optics
120
Color temperature
3K
4K
5K
Wattage
20W
36W
60W
Body color
S
-
+
+
Ordering details
Enclosure type
HL
Hazardous Locations Rated Body
Mounting
RFC
Crouse-Hinds Champ
RFK
Killark Certilite
RFH
Holophane Petrolux II
RFA2
MercMaster II
RFA3
MercMaster III
RFGE
GE Filtr-Guard H2
RFTB
Hazlux by Thomas & Betts
RFCN
Crouse-Hinds Champ N2MV
Reflector (lens)
GM
Borosilicate glass and mesh guard
XPC
Extreme polycarbonate lens
Voltage
RV
120-277 VAC, 50/60 Hz
HV*
347-480 VAC, 50/60 Hz
Secondary optics
120
Full Flood (No Optics - Standard)
Color temperature
3K
3000K
4K
4000K
5K
5000K
Wattage
20W
36W
60W
Body color
S
Silver (Standard)
* – only available for 20W, 36W
Applications
- Upgrade Existing Tophat Fixtures to LED
- Hazardous locations
- Locations requiring continuous and consistent light levels in extreme heat or cold.
- Wastewater
- Marine, Engine and Battery Rooms
- Energy Gas & Oil
- Manufacturing
Documents
2d pdf, 2d dwg, 3d step
Compliance & certification
ETL/CETL Certified to:
UL 844 Suitable for Hazardous (Classified) Locations
UL 1598 Suitable for Wet Locations
UL 1598A Marine Outside Type (Saltwater)
CSA C22.2 No. 250.0
CSA C22.2 No. 137
IP66 rated per IEC 60598-1 | -40°C to +55°C
UL 1598 Suitable for Wet Locations
UL 1598A Marine Outside Type (Saltwater)
CSA C22.2 No. 250.0
CSA C22.2 No. 137
IP66 rated per IEC 60598-1 | -40°C to +55°C
Approved for:
Class I Division 2 Groups A, B, C, D
Class I Zone 2 Group IIC
Class II Division 1 and 2 Groups E, F, G
Class II Zone 20, 21, or 22 Group IIB
Class III
1Ex d IIC T5 | -40°C to +55°C
Class I Zone 2 Group IIC
Class II Division 1 and 2 Groups E, F, G
Class II Zone 20, 21, or 22 Group IIB
Class III
1Ex d IIC T5 | -40°C to +55°C
Similar products
Plafond™ for HL
Hazardous Location. PLAFOND™ is for applications where conventional lighting is not acceptable due to size and/or location, such as Modular manufacturers, OEM applications, instrument and gauge applications.
STOP REPLACING BULBS AND BALLASTS
Save energy and labor by upgrading to LED using RETRUS™ to retrofit your existing fixtures. Try RETRUS™ for 30 days 100% risk free.
Retrofit Your Existing Bulbs in Under 2 Minutes
When you choose RETRUS to retrofit your existing bulbs you’ll save money on labor. Replacing bulbs with our RETRUS is quick and easy. Watch the video to see it done from start to finish in under 2 minutes.
