Plafond™ for HL
Hazardous Location. PLAFOND™ is for applications where conventional lighting is not acceptable due to size and/or location, such as Modular manufacturers, OEM applications, instrument and gauge applications.
Prev
Next
RETRUS™ FOR HL
Specification
| MODEL WATTAGE | 20W | 36W | 60W | 80W |
| LUMEN OUTPUT | 2600 LM (GM) 2300 LM (XPC) | 5200 LM (GM) 4900 LM (XPC) | 7600 LM (GM) 7200 LM (XPC) | 9200 LM (GM) 8500 LM (XPC) |
| DIMENSIONS | Various (see drawings) | |||
| NET FIXTURE WEIGHT | Various (see drawings) | |||
| ENCLOSURE MATERIAL | Copper free aluminum alloy | |||
| FINISH | Polyester powder coat finish | |||
| HARDWARE AND MOUNTING | Marine grade stainless steel parts and screws | |||
| CABLE GLANDS AND CONNECTORS | Classified for CID2 nickel plated brass cable gland | |||
| LENS | Military Grade UL94 V-0 rated Lexan/Tempered clear borosilicate glass | |||
| LIGHT SOURCE | High Power CREE LEDs | |||
| COLOR RENDITION INDEX (CRI) | > 70 | |||
| INPUT POWER (+25°C) | 20W | 36W | 55W | 80W |
| FIXTURE EFFICIENCY | 130 LPW (GM) 115 LPW (XPC) | 140 LPW (GM) 135 LPW (XPC) | 135 LPW (GM) 130 LPW (XPC) | 115 LPW (GM) 105 LPW (XPC) |
| LED DRIVER | Inventronics 90-305VAC | Custom made 120-277 VAC | MeanWell 90-295 VAC | MeanWell 90-305 VAC |
| LED DRIVER PROTECTION | Short circuit, over load protection, over voltage | Output short circuit, over temperature | Over temperature, over current, over voltage | |
| SURGE PROTECTION | 2 kV | 1 kV | 2kV | 2kV |
| POWER FACTOR | > 0.95 (120, 220VAC) > 0.9 (277VAC) | > 0.95 | > 0.95 at 115V | > 0.95 |
| THD (total harmonic distortion) | <20% | <30% | <20% | |
| INRUSH CURRENT | 40А | 27A | 45A | 60А |
| AMBIENT OPERATING TEMPERATURE | -40°C to +55°C | -40°C to +55°C | -40°C to +50°C | -40°C to +45°C |
| T-RATING for (+55°C) | Т6 | T5 | T6 | T5 |
| FIXTURE LIFE (+25°C) | 120 000 hours | 70 000 hours | 100 000 hours | 100 000 hours |
| FIXTURE LIFE (+55°C) | 40 000 hours | 40 000 hours | 50 000 hours (+50°C) | 50 000 hours (+45°C) |
| FIXTURE LIFE (+65°C) | N/A | N/A | N/A | N/A |
| WARRANTY | 5 year | 5 Years | 5 Years | 5 Years |
Applications
- Upgrade Existing Tophat Fixtures to LED
- Hazardous locations
- Locations requiring continuous and consistent light levels in extreme heat or cold.
- Wastewater
- Marine, Engine and Battery Rooms
- Energy Gas & Oil
- Manufacturing
Documents
2d pdf, 2d dwg, 3d step
Compliance & certification
ETL/CETL Certified to:
UL 844 Suitable for Hazardous (Classified) Locations
UL 1598 Suitable for Wet Locations
UL 1598A Marine Outside Type (Saltwater)
CSA C22.2 No. 250.0
CSA C22.2 No. 137
IP66 rated per IEC 60598-1 | -40°C to +55°C
UL 1598 Suitable for Wet Locations
UL 1598A Marine Outside Type (Saltwater)
CSA C22.2 No. 250.0
CSA C22.2 No. 137
IP66 rated per IEC 60598-1 | -40°C to +55°C
Approved for:
Class I Division 2 Groups A, B, C, D
Class I Zone 2 Group IIC
Class II Division 1 and 2 Groups E, F
Class II Zone 20, 21, or 22 Group IIB
Class III
1Ex d IIC T5 | -40°C to +55°C
Class I Zone 2 Group IIC
Class II Division 1 and 2 Groups E, F
Class II Zone 20, 21, or 22 Group IIB
Class III
1Ex d IIC T5 | -40°C to +55°C
Similar products
Oppry™ for HL
Hazardous Location. OPPRY™ is lightweight, easy to install and versatile in all hazardous location applications due to size compactness.
